Wi-Fi hacking

By | 14 October 2017

In today’s world, Wi-Fi hacking has become very normal amongst people. It might have its own risks, but it has opened doors of opportunities for many. And if talking about Wi-Fi hacking, then it is something that everyone must have tried at least once in their life or thought about doing it, not because it is tempting but because it has its own benefits. There are a lot of softwares for hacking Wi-Fi in the market that promise Wi-Fi hacking with just one click but most of them do not work.

You must have encountered these softwares at least once in your life. It is really hard to find the ones that actually do. There are actually some steps that one must follow to achieve their motive.
Different methods of hacking Wi-Fi password from android.

If you live in a place where there are a lot of Wi-Fi that are in your house’s range, but it is impossible for you to access them because they have the password. But don’t worry, there is actually a way to access their Wi-Fi without asking for their consent. Listed below are some legit ways on how to hack wifi password.

1. Wi-Fi hacking by WPA2 WPS Hacking

Remember to use an android device for this one. It is mandatory to make sure that your device meets all the requirements that are necessary for the completion of the process. The first thing that you need to do is root your device. Now, the thing not many people know about is that for hooking you must have a Broadcom 4330. BCM 4329 also works fine. So make sure you examine the chipset of your device. There are many handsets that do not meet the requirements and the hacking process ends up failing.

Now to start with the procedure Wi-Fi hacking after you are done checking the chipset, search bcmon.apk on your browser and install it on your device. The work of this app is to monitor the device’s chipset, which is behind the support system of your PIN hacking. Once you have installed the application on your device, run the application. Once you run it, you will see an option of “monitor mode”. Click on that option. So now your chipset will start to get monitored. Now download reaver.apk. This application allows you to crack the PIN which will eventually let you have the password.

Download the app

So download that application on your device and run it. Now it will ask if you want to use the app for illegal purposes. Just press no and move on to the next step. Now it will show the available APNs near you. So choose the one that you want to hack and go to the next step. The next step will include a verification step where the app will verify if your device is in monitor mode. Once you verify the monitor mode, the bcmon app you downloaded before will get activated. Once the app will appear on the screen, the verification step will be completed. Now go to the app’s settings and make sure that the “Automatic advance” option is enabled.

Now it is time for the final step. This process is basically the last process where the wifi cracker will start to work. For that, just click the “start” button. The process of hacking wifi will start. The process might take 2 hours, but the end result will be worth waiting.

2. WEP router hacking

Just like before, this app also needs a rooted device to work. Moreover, there is actually a minimum chipset requirement to run this app which is same as before. Now repeat the same step of download bcmon.apk in your device which will help in monitoring your chipset. Once the app is installed, click on the “monitor mode” button. After that, click on the button that says “run bcmon-terminal”. After that type “airodump-ng” in the command window and press enter.

Now the airodump will probably start to load. After its completion, a command prompt window will appear where you have to enter “airodump-ng wlan0” command. This was the first step of the whole process.

At this point, the first step will be completed. Once completed, MAC addresses will appear. These are the addresses that are available nearby. Now copy the MAC address. To complete the hacking procedure, scan the MAC address. Scanning the channel will give you info on the APN. After that, type the command “airodump-ng-cchannel#-bssidMAC address-woutputth0” and hit the enter button. This is how your scanning will start to take place. This should and must reach 30,000 packets.

Now to successfully hack the password, all you need to do is just go back to the terminal. Now it is time to make sure that you have a desired amount of packages. In terminal, you have to give another command “aircrack-ng output*.cap”. Now click enter. Now the app will hack the password. Once done, the device will give you notification “Key Found”. That key will probably in a hexadecimal structure. While entering the password, don’t use colons. Voila! You hacked the password.

3. Android dumper

This is one of the easiest and most useful wifi cracking app that you can find for Android devices. Also, the best part of this app is that it does not require you to root your device (just like Password scrapper). To get started with the hacking, follow the steps that are mentioned below.

Firstly, download the app from the app store and run it on your device. When you run this app, you will see a refresh button at the top of the screen of your device. Click on that button and the app will show you all the available networks that you can connect to. So now choose the Wi-Fi network that you want to hack and click on try connect option. This will hack the wifi in a small time. This app is not as fast as other two and the result might now be satisfying, but it made it to the list because it can actually do it with a little amount of tries.


Leave a Reply

Your email address will not be published. Required fields are marked *